Introduction

Welcome to our comprehensive guide on fixing a leaky faucet! Dealing with a dripping faucet can be both annoying and wasteful. In this DIY tutorial, we will walk you through step-by-step instructions on how to repair a leaky faucet like a pro. Let’s dive in!

Tools and Materials You Will Need

Before getting started, gather the following tools and materials:

• Adjustable wrench
• Screwdriver
• Replacement washers or O-rings
• Plumber’s grease
• Towel or rag
• Bucket

Step 1: Turn Off the Water Supply

Begin by turning off the water supply to the faucet. Locate the shut-off valves under the sink and turn them clockwise to close.

Step 2: Remove the Handle

Use a screwdriver to remove the handle of the faucet. Depending on the type of faucet, you may need to unscrew a cap covering the handle.

Step 3: Access the Cartridge or Valve

Once the handle is removed, you will have access to the cartridge or valve. Inspect it for any signs of wear or damage.

Step 4: Replace Washers or O-Rings

If the washers or O-rings are worn out, carefully remove them and replace them with new ones. Apply plumber’s grease to ensure a tight seal.

Step 5: Reassemble the Faucet

Put the faucet handle back in place and tighten the screws. Make sure everything is securely reassembled.

Step 6: Turn On the Water Supply

Once you have reassembled the faucet, turn the water supply back on and check for leaks. If everything looks good, congratulations, you have successfully fixed your leaky faucet!

Conclusion

By following these simple steps, you can easily fix a leaky faucet on your own, saving both time and money. Remember to always turn off the water supply before starting any plumbing repair. We hope this guide has been helpful, and may your faucets drip no more!